implementing purdue model network segmentation

Engineering Community

Skill notes

When to Use

When designing or retrofitting network architecture for an ICS/SCADA environment When implementing IEC 62443 zone and conduit requirements in a brownfield plant When creating the IT/OT DMZ (Level 3.5) to control data flow between enterprise and control networks When remediating audit findings about flat OT networks or direct IT-to-OT connectivity When segmenting a converged IT/OT network after an acquisition or merger

Prerequisites

Complete OT asset inventory with Purdue level classification for each device Network architecture diagram showing current topology, VLANs, and firewall placements Industrial firewalls capable of deep packet inspection for OT protocols (Palo Alto, Fortinet, Cisco) Understanding of required data flows between Purdue levels (historian replication, remote access, patch distribution) Change management approval from plant operations for network modifications

Step 2: Configure Industrial DMZ (Level 3.5)

The DMZ is the critical boundary between IT and OT. All data exchange must traverse it -- no direct connections are permitted.

Key Concepts

Term · Definition Purdue Model (PERA) · Hierarchical reference architecture organizing industrial networks into levels 0-5 based on function and trust Level 3.5 DMZ · Demilitarized zone between IT (Level 4) and OT (Level 3), where all cross-boundary data exchange occurs Defense in Depth · Layered security approach requiring attackers to breach multiple boundaries to reach critical control systems Data Diode · Hardware-enforced unidirectional communication device ensuring data flows only from OT to IT, never reverse

Scenario: Flat OT Network Remediation

Context: An audit reveals that enterprise IT systems can directly communicate with PLCs on the control network. There is no DMZ and no firewall between IT and OT. Approach: Perform full traffic analysis to identify all legitimate data flows crossing IT/OT boundary Design DMZ architecture with historian replica, jump server, and patch staging Deploy industrial firewall between IT and DMZ (north firewall) and between DMZ and OT (south firewall)

Fluxly profile Runtime and permissions are inferred by Fluxly static checks, not author declarations or runtime test results.
Domain
Engineering
Author-declared agents
No explicit declaration found; this is not inferred or tested compatibility
Static check
88 / 100 · heuristic scan, not runtime safety proof
Runtime evidence
Not run; no isolated runtime test evidence is currently recorded
Author / version / license
@mukul975 · no license declared
Token usage
Lean
Setup complexity
Guided setup
External API key
Not required
Operating systems
Unspecified (assume cross-platform)
Runtime requirements
Python
Detected file/system behavior
  • Read-only
  • Write / modify
Network behavior
External requests
Install commands
None (reference only)

Heads up: Tool permissions are not declared; actual access depends on the runtime.

01
Step 1: Map Current Architecture to Purdue Levels

Classify all network assets and data flows according to the Purdue Model hierarchy.

02
Step 2: Configure Industrial DMZ (Level 3.5)

The DMZ is the critical boundary between IT and OT. All data exchange must traverse it -- no direct connections are permitted.

Discussion

Powered by GitHub Discussions. Sign in with GitHub to comment, react, or subscribe.