agent browser electron
- Repo stars 39,477
- Author repo airi
- Domain
- AI
- Author-declared agents
- No explicit declaration found; this is not inferred or tested compatibility
- Static check
- 88 / 100 · heuristic scan, not runtime safety proof
- Runtime evidence
- Not run; no isolated runtime test evidence is currently recorded
- Author / version / license
- @moeru-ai · no license declared
- Token usage
- Lean
- Setup complexity
- Guided setup
- External API key
- Not required
- Operating systems
- Windows
- Runtime requirements
- No explicit requirements detected
- Detected file/system behavior
-
- Read-only
- Write / modify
- Shell exec
- Env read
- Network behavior
- External requests
- Install commands
- None (reference only)
Heads up: Tool permissions are not declared; actual access depends on the runtime.
# AIRI Example
APP_REMOTE_DEBUG=true APP_REMOTE_DEBUG_PORT=9250 pnpm dev:tamagotchi
# Agent Browser Electron
## Overview
Inspect Electron renderer windows reliably when `agent-browser` alone is not enough to tell which CDP target maps to which visible app window.
Prefer raw CDP target discovery over guessing from `tab list`, then use `agent-browser --cdp <port> tab` stable tab IDs to interact with the renderer target you want.
## Why Raw CDP Discovery
Use raw CDP target discovery because `agent-browser` is operating as a convenience layer on top of Chrome DevTools Protocol, and that layer can hide or flatten details that matter in Electron.
Raw `/json/list` is the source of truth for CDP target discovery because it exposes Chromium's target inventory without extra interpretation. It is not the same thing as Electron's `BrowserWindow.getAllWindows()`.
In Electron, that distinction matters because:
- multiple `BrowserWindow` instances can share the same URL
- some windows are created lazily and appear only after an app action
- a visible Electron window is inspectable only after its renderer/webContents exists and is exposed as a CDP target
- detached DevTools pages and workers add noise
- `agent-browser tab list` may show only a subset of targets or present them with reduced metadata
- session state inside `agent-browser` can keep you attached to a previous renderer unless you reset and verify
In practice, the higher-level `tab list` view is useful for quick browsing, but not reliable enough for window-to-target mapping when:
- two Electron windows both look like `http://localhost:5173/#/`
- the title is empty or collapsed
- a chat or settings window exists in CDP but is not obvious in the simplified tab output
Use `curl http://127.0.0.1:<port>/json/list` first whenever correct target selection matters. Treat `agent-browser` as the interaction client after target discovery, not as the only discovery source.
If `/json/list` does not contain a window that the user says exists, do not assume `agent-browser` hid it. First consider that the window may not have been created yet, may not have loaded a renderer route yet, or may not currently be exposed as a CDP target. Trigger the window from the app UI or Electron main-process action, then enumerate `/json/list` again.
## Workflow
1. Confirm the app exposes a CDP port.
The CDP port is project- and run-command-specific. Do not assume `9222`, `9250`, or any other value is universal. If an Electron process is running but no CDP port responds, tell the user to relaunch the app with the project's remote-debug environment variables or launch flags.
For AIRI stage-tamagotchi on POSIX shells:
```bash
APP_REMOTE_DEBUG=true APP_REMOTE_DEBUG_PORT=9250 pnpm dev:tamagotchi
```
For Windows PowerShell:
```powershell
$env:APP_REMOTE_DEBUG = "true"
$env:APP_REMOTE_DEBUG_PORT = "9250"
pnpm dev:tamagotchi
```
For Windows Git Bash:
```bash
APP_REMOTE_DEBUG=true APP_REMOTE_DEBUG_PORT=9250 pnpm dev:tamagotchi
```
Adjust the port to match what the user actually started. If the project uses a different mechanism, inspect its Electron launch code before giving command advice.
2. Ensure the Electron window exists.
If the app uses lazy window creation, `agent-browser` cannot inspect a window that has not been created yet. Open it from the app UI or trigger its Electron-side open handler first.
3. Inspect raw CDP targets instead of trusting `agent-browser --cdp <port> tab`.
```bash
curl -sS http://127.0.0.1:<port>/json/list
```
Read these fields:
- `title`
- `url`
- `type`
- `webSocketDebuggerUrl`
Use `/json/version` if you need to confirm the port is a Chromium/Electron CDP endpoint or need the browser-level debugger URL:
```bash
curl -sS http://127.0.0.1:<port>/json/version
```
4. Match the target to the Electron window.
Common patterns:
- Distinct route: chat may be `http://localhost:5173/#/chat` while the main window is `http://localhost:5173/#/`.
- Distinct title: Electron window titles may surface in the target list.
- Duplicate URLs: two windows may both report `http://localhost:5173/#/`; in that case use screenshots, snapshots, and Electron app knowledge to disambiguate.
- Hidden noise: worker targets and detached DevTools targets are not your app window.
5. List the targets through `agent-browser` and switch with stable tab IDs.
```bash
agent-browser --cdp <port> tab
agent-browser --cdp <port> tab t2
```
Do not use positional integers. If `agent-browser tab` prints `[t2]`, switch with `tab t2`.
6. Verify the target immediately.
```bash
agent-browser --cdp <port> get url
agent-browser --cdp <port> get title
agent-browser --cdp <port> snapshot -i
```
7. If stable tab switching is not enough, reset session state and reconnect.
```bash
agent-browser close --all
agent-browser connect <webSocketDebuggerUrl>
agent-browser get url
```
If needed:
```bash
agent-browser --cdp <port> screenshot /tmp/electron-target.png --annotate
agent-browser --cdp <port> console
agent-browser --cdp <port> errors
```
## Fast Triage
Use this order when the Electron app has multiple windows:
1. `curl /json/list`
2. Find the renderer page target with the route or title you expect
3. Ignore `worker` targets unless the task is specifically about workers
4. Ignore `DevTools` page targets unless debugging DevTools itself
5. `agent-browser --cdp <port> tab`
6. Switch with the stable tab ID, for example `agent-browser --cdp <port> tab t3`
7. `agent-browser --cdp <port> get url`
8. `agent-browser --cdp <port> snapshot -i`
9. If the expected route is missing, trigger the lazy window from the UI and repeat from step 1
## AIRI Example
In `apps/stage-tamagotchi`, some windows are lazy-created. The main window loads `/#/`; settings loads `/#/settings`; chat loads `/#/chat`; BeatSync loads `/beat-sync.html`.
The `9250` examples below assume the app was started by the person running it with:
```bash
APP_REMOTE_DEBUG=true APP_REMOTE_DEBUG_PORT=9250 pnpm dev:tamagotchi
```
That port is not intrinsic to AIRI or Electron. It depends on the current command and environment. Most stage-tamagotchi code lives under `apps/stage-tamagotchi`; inspect that app's Electron startup and window code when the port, routes, or remote-debug behavior differ.
Relevant files:
- `apps/stage-tamagotchi/src/main/windows/chat/index.ts`
- `apps/stage-tamagotchi/src/main/windows/main/index.ts`
- `apps/stage-tamagotchi/src/main/libs/electron/window-manager/reusable.ts`
- `apps/stage-tamagotchi/src/renderer/components/stage-islands/controls-island/index.vue`
That means:
- chat does not exist in CDP until something calls `chatWindow()`
- settings and chat can be opened from the main window controls
- once created, raw CDP target discovery will show page targets such as `http://localhost:5173/#/settings` and `http://localhost:5173/#/chat`
- the stable way to inspect a window is to enumerate raw CDP targets, map them to `agent-browser` stable tab IDs, switch, and verify with `get url`
Example:
```bash
curl -sS http://127.0.0.1:9250/json/list
agent-browser --cdp 9250 tab
agent-browser --cdp 9250 tab t4
agent-browser --cdp 9250 get url
agent-browser --cdp 9250 snapshot -i
```
If settings or chat is missing, start from the main window:
```bash
agent-browser --cdp 9250 tab t2
agent-browser --cdp 9250 snapshot -i
# Click the main window control that opens the panel or launcher.
# In AIRI this is the arrow-up control in the bottom-right controls island.
# Re-snapshot after every click because refs are stale after UI changes.
agent-browser --cdp 9250 click '[i-solar\:alt-arrow-up-line-duotone]'
agent-browser --cdp 9250 snapshot -i
```
Then open the desired entry from the expanded controls and enumerate again:
```bash
agent-browser --cdp 9250 click '[i-solar\:settings-minimalistic-outline]'
agent-browser --cdp 9250 click '[i-solar\:chat-line-line-duotone]'
curl -sS http://127.0.0.1:9250/json/list
agent-browser --cdp 9250 tab
```
If the controls island is visible but the accessibility refs or CSS icon click do not expand it, inspect the Vue component as a diagnostic fallback. AIRI currently nests tooltip trigger buttons around icon buttons, so a CDP click can report success while landing on the wrapper instead of the Vue `ControlButton` listener. This fallback is for automation/debugging only; do not use it as evidence that end-user clicking works.
```bash
agent-browser --cdp 9250 eval '(() => {
const icon = document.querySelector("[i-solar\\:alt-arrow-up-line-duotone]")
let controls = icon.__vueParentComponent
for (let i = 0; i < 10; i++) controls = controls.parent
controls.devtoolsRawSetupState.expanded.value = true
controls.proxy.$nextTick()
return controls.devtoolsRawSetupState.expanded.value
})()'
```
Expected verification for chat:
- `agent-browser --cdp 9250 get url` returns `http://localhost:5173/#/chat`
- the snapshot exposes chat UI controls such as the message textbox or send button
Expected verification for settings:
- `agent-browser --cdp 9250 get url` returns `http://localhost:5173/#/settings`
- the snapshot exposes settings navigation or configuration controls
## Failure Modes
- `agent-browser tab` omits or flattens the target you need: use raw `/json/list`.
- `/json/list` and browser-level target discovery both omit the window: the renderer target is not currently exposed. Trigger the window creation/loading path, then enumerate again.
- `connect <webSocketDebuggerUrl>` appears to succeed but later commands still point at another renderer: switch with `agent-browser --cdp <port> tab tN`, or run `agent-browser close --all`, reconnect, and verify with `get url`.
- multiple windows share the same URL: use the target title, annotated screenshots, and app code to correlate them.
- `eval` returns `{}` for object values: prefer `get url`, `get title`, `snapshot -i`, or primitive-only eval return values.
- no chat or settings target appears: the window may not have been created yet, or may exist as an Electron object without an inspectable renderer target.
Sections and files
Listed in source order.
sections -> Overview → Why Raw CDP Discovery → Workflow → Fast Triage → AIRI Example → Failure Modes
terms -> Inspect Electron renderer windows reliably when agent-browser alone is not enough to tell which CDP target maps to which visible app window. · Raw /json/list is the source of truth for CDP target discovery because it exposes Chromium's target inventory without extra interpretation. · Use curl http://127.0.0.1:<port>/json/list first whenever correct target selection matters. · If /json/list does not contain a window that the user says exists, do not assume agent-browser hid it. · 1. Confirm the app exposes a CDP port. · The CDP port is project- and run-command-specific. · Adjust the port to match what the user actually started. · 2. Ensure the Electron window exists.
files/cmd -> agent-browser · tab list · agent-browser --cdp <port> tab · /json/list · BrowserWindow.getAllWindows() · BrowserWindow · agent-browser tab list · http://localhost:5173/#/
body sha256 -> dde993724533
Overview
Inspect Electron renderer windows reliably when
agent-browseralone is not enough to tell which CDP target maps to which visible app window. Prefer raw CDP target discovery over guessing fromtab list, then useagent-browser --cdp <port> tabstable tab IDs to interact with the renderer target you want.Why Raw CDP Discovery
Use raw CDP target discovery because
agent-browseris operating as a convenience layer on top of Chrome DevTools Protocol, and that layer can hide or flatten details that matter in Electron. Raw/json/listis the source of truth for CDP target discovery because it exposes Chromium's target inventory without extra interpretation. It is not the same thing as Electron'sBrowserWindow.getAllWindows().Workflow
Confirm the app exposes a CDP port. The CDP port is project- and run-command-specific. Do not assume
9222,9250, or any other value is universal. If an Electron process is running but no CDP port responds, tell the user to relaunch the app with the project's remote-debug environment variables or launch flags. For AIRI stage-tamagotchi on POSIX shells: For Windows PowerShell: For Windows Git Bash:Fast Triage
Use this order when the Electron app has multiple windows:
curl /json/listFind the renderer page target with the route or title you expect Ignoreworkertargets unless the task is specifically about workers IgnoreDevToolspage targets unless debugging DevTools itselfAIRI Example
In
apps/stage-tamagotchi, some windows are lazy-created. The main window loads/#/; settings loads/#/settings; chat loads/#/chat; BeatSync loads/beat-sync.html. The9250examples below assume the app was started by the person running it with: That port is not intrinsic to AIRI or Electron. It depends on the current command and environment. Most stage-tamagotchi code lives underapps/stage-tamagotchi; inspect that app's Electron startup and window code when the port, routes, or remote-debug behavior differ.