代理浏览器

人工智能 社区

技能解读

当前原文的自动摘译,尚未人工审校。

核心工作流程

每个浏览器自动化都遵循以下模式: 导航:agent-browser open <url> 快照:agent-browser snapshot -i(获取元素引用,如 @e1、@e2) 交互:使用引用来单击、填充、选择 重新快照:导航或 DOM 更改后,获取新的引用

iOS 模拟器(移动 Safari)

要求:带有 Xcode 的 macOS、Appium (npm install -g appium && appium driver install xcuitest) 真实设备:如果预先配置,可与物理 iOS 设备配合使用。使用--device "<UDID>",其中 UDID 来自xcrun xctrace list devices。

参考生命周期(重要)

当页面更改时,引用(@e1、@e2等)将失效。始终在以下时间后重新快照: 单击导航的链接或按钮 表单提交 动态内容加载(下拉菜单、模式)

语义定位器(参考的替代)

当引用不可用或不可靠时,请使用语义定位器:

深入研究文档

参考 · 何时使用引用/commands.md · 包含所有选项的完整命令参考引用/snapshot-refs.md · 引用生命周期、失效规则、故障排除参考/session-management.md · 并行会话、状态持久性、并发抓取引用/authentication.md · 登录流程、OAuth、2FA 处理、状态重用

流狐档案 运行与权限由流狐静态检查推断,不代表作者声明或实际测试结果。
领域
人工智能
作者声明的智能体
未找到明确声明;不据此推断已兼容或已测试
静态检查
94 / 100 · 启发式扫描,不代表运行安全
运行环境证据
未执行;当前没有隔离运行测试证据
作者 / 版本 / 许可证
@DonaldMurillo · MIT
上下文用量评级
低消耗
接入复杂程度
即装即用
是否需要外部接口密钥
不需要
兼容的系统
macOS
运行环境要求
未检出明确要求
检测到的文件与系统行为
  • 只读
  • 允许写入 / 修改
网络行为
仅限本地
安装命令数
无(仅作为资料)

需要注意: 未声明工具权限范围;实际权限由运行环境决定。

作者说明文件(原文) SKILL.md

# Browser Automation with agent-browser

## Core Workflow

Every browser automation follows this pattern:

1. **Navigate**: `agent-browser open <url>`
2. **Snapshot**: `agent-browser snapshot -i` (get element refs like `@e1`, `@e2`)
3. **Interact**: Use refs to click, fill, select
4. **Re-snapshot**: After navigation or DOM changes, get fresh refs

```bash
agent-browser open https://example.com/form
agent-browser snapshot -i
# Output: @e1 [input type="email"], @e2 [input type="password"], @e3 [button] "Submit"

agent-browser fill @e1 "user@example.com"
agent-browser fill @e2 "password123"
agent-browser click @e3
agent-browser wait --load networkidle
agent-browser snapshot -i  # Check result
```

## Essential Commands

```bash
# Navigation
agent-browser open <url>              # Navigate (aliases: goto, navigate)
agent-browser close                   # Close browser

# Snapshot
agent-browser snapshot -i             # Interactive elements with refs (recommended)
agent-browser snapshot -s "#selector" # Scope to CSS selector

# Interaction (use @refs from snapshot)
agent-browser click @e1               # Click element
agent-browser fill @e2 "text"         # Clear and type text
agent-browser type @e2 "text"         # Type without clearing
agent-browser select @e1 "option"     # Select dropdown option
agent-browser check @e1               # Check checkbox
agent-browser press Enter             # Press key
agent-browser scroll down 500         # Scroll page

# Get information
agent-browser get text @e1            # Get element text
agent-browser get url                 # Get current URL
agent-browser get title               # Get page title

# Wait
agent-browser wait @e1                # Wait for element
agent-browser wait --load networkidle # Wait for network idle
agent-browser wait --url "**/page"    # Wait for URL pattern
agent-browser wait 2000               # Wait milliseconds

# Capture
agent-browser screenshot              # Screenshot to temp dir
agent-browser screenshot --full       # Full page screenshot
agent-browser pdf output.pdf          # Save as PDF
```

## Common Patterns

### Form Submission

```bash
agent-browser open https://example.com/signup
agent-browser snapshot -i
agent-browser fill @e1 "Jane Doe"
agent-browser fill @e2 "jane@example.com"
agent-browser select @e3 "California"
agent-browser check @e4
agent-browser click @e5
agent-browser wait --load networkidle
```

### Authentication with State Persistence

```bash
# Login once and save state
agent-browser open https://app.example.com/login
agent-browser snapshot -i
agent-browser fill @e1 "$USERNAME"
agent-browser fill @e2 "$PASSWORD"
agent-browser click @e3
agent-browser wait --url "**/dashboard"
agent-browser state save auth.json

# Reuse in future sessions
agent-browser state load auth.json
agent-browser open https://app.example.com/dashboard
```

### Data Extraction

```bash
agent-browser open https://example.com/products
agent-browser snapshot -i
agent-browser get text @e5           # Get specific element text
agent-browser get text body > page.txt  # Get all page text

# JSON output for parsing
agent-browser snapshot -i --json
agent-browser get text @e1 --json
```

### Parallel Sessions

```bash
agent-browser --session site1 open https://site-a.com
agent-browser --session site2 open https://site-b.com

agent-browser --session site1 snapshot -i
agent-browser --session site2 snapshot -i

agent-browser session list
```

### Visual Browser (Debugging)

```bash
agent-browser --headed open https://example.com
agent-browser highlight @e1          # Highlight element
agent-browser record start demo.webm # Record session
```

### iOS Simulator (Mobile Safari)

```bash
# List available iOS simulators
agent-browser device list

# Launch Safari on a specific device
agent-browser -p ios --device "iPhone 16 Pro" open https://example.com

# Same workflow as desktop - snapshot, interact, re-snapshot
agent-browser -p ios snapshot -i
agent-browser -p ios tap @e1          # Tap (alias for click)
agent-browser -p ios fill @e2 "text"
agent-browser -p ios swipe up         # Mobile-specific gesture

# Take screenshot
agent-browser -p ios screenshot mobile.png

# Close session (shuts down simulator)
agent-browser -p ios close
```

**Requirements:** macOS with Xcode, Appium (`npm install -g appium && appium driver install xcuitest`)

**Real devices:** Works with physical iOS devices if pre-configured. Use `--device "<UDID>"` where UDID is from `xcrun xctrace list devices`.

## Ref Lifecycle (Important)

Refs (`@e1`, `@e2`, etc.) are invalidated when the page changes. Always re-snapshot after:

- Clicking links or buttons that navigate
- Form submissions
- Dynamic content loading (dropdowns, modals)

```bash
agent-browser click @e5              # Navigates to new page
agent-browser snapshot -i            # MUST re-snapshot
agent-browser click @e1              # Use new refs
```

## Semantic Locators (Alternative to Refs)

When refs are unavailable or unreliable, use semantic locators:

```bash
agent-browser find text "Sign In" click
agent-browser find label "Email" fill "user@test.com"
agent-browser find role button click --name "Submit"
agent-browser find placeholder "Search" type "query"
agent-browser find testid "submit-btn" click
```

## Deep-Dive Documentation

| Reference                                                            | When to Use                                               |
| -------------------------------------------------------------------- | --------------------------------------------------------- |
| [references/commands.md](references/commands.md)                     | Full command reference with all options                   |
| [references/snapshot-refs.md](references/snapshot-refs.md)           | Ref lifecycle, invalidation rules, troubleshooting        |
| [references/session-management.md](references/session-management.md) | Parallel sessions, state persistence, concurrent scraping |
| [references/authentication.md](references/authentication.md)         | Login flows, OAuth, 2FA handling, state reuse             |
| [references/video-recording.md](references/video-recording.md)       | Recording workflows for debugging and documentation       |
| [references/proxy-support.md](references/proxy-support.md)           | Proxy configuration, geo-testing, rotating proxies        |

## Ready-to-Use Templates

| Template                                                                 | Description                         |
| ------------------------------------------------------------------------ | ----------------------------------- |
| [templates/form-automation.sh](templates/form-automation.sh)             | Form filling with validation        |
| [templates/authenticated-session.sh](templates/authenticated-session.sh) | Login once, reuse state             |
| [templates/capture-workflow.sh](templates/capture-workflow.sh)           | Content extraction with screenshots |

```bash
./templates/form-automation.sh https://example.com/form
./templates/authenticated-session.sh https://app.example.com/login
./templates/capture-workflow.sh https://example.com ./output
```

讨论

基于 GitHub Discussions。登录 GitHub 即可参与讨论、点赞、订阅更新。