代理开发
- 作者仓库星标 25,970
- 作者仓库 claude-plugins-official
- 领域
- 设计与多媒体
- 作者声明的智能体
- 未找到明确声明;不据此推断已兼容或已测试
- 静态检查
- 92 / 100 · 启发式扫描,不代表运行安全
- 运行环境证据
- 未执行;当前没有隔离运行测试证据
- 作者 / 版本 / 许可证
- @anthropics · v0.1.0 · 未声明许可证
- 上下文用量评级
- 中等消耗
- 接入复杂程度
- 需简单配置
- 是否需要外部接口密钥
- 不需要
- 兼容的系统
- 未声明(默认跨平台)
- 运行环境要求
- 未检出明确要求
- 检测到的文件与系统行为
-
- 只读
- 允许写入 / 修改
- 命令执行
- 网络行为
- 仅限本地
- 安装命令数
- 无(仅作为资料)
需要注意: 未声明工具权限范围;实际权限由运行环境决定。
# Agent Development for Claude Code Plugins
## Overview
Agents are autonomous subprocesses that handle complex, multi-step tasks independently. Understanding agent structure, triggering conditions, and system prompt design enables creating powerful autonomous capabilities.
**Key concepts:**
- Agents are FOR autonomous work, commands are FOR user-initiated actions
- Markdown file format with YAML frontmatter
- Triggering via description field with examples
- System prompt defines agent behavior
- Model and color customization
## Agent File Structure
### Complete Format
```markdown
---
name: agent-identifier
description: Use this agent when [triggering conditions]. Typical triggers include [scenario 1 in prose], [scenario 2 in prose], and [scenario 3 in prose]. See "When to invoke" in the agent body for worked scenarios.
model: inherit
color: blue
tools: ["Read", "Write", "Grep"]
---
You are [agent role description]...
## When to invoke
[Two to four representative scenarios written as prose, e.g.:]
- **[Scenario name].** [What the situation looks like and what the agent should do.]
- **[Scenario name].** [Same.]
**Your Core Responsibilities:**
1. [Responsibility 1]
2. [Responsibility 2]
**Analysis Process:**
[Step-by-step workflow]
**Output Format:**
[What to return]
```
## Frontmatter Fields
### name (required)
Agent identifier used for namespacing and invocation.
**Format:** lowercase, numbers, hyphens only
**Length:** 3-50 characters
**Pattern:** Must start and end with alphanumeric
**Good examples:**
- `code-reviewer`
- `test-generator`
- `api-docs-writer`
- `security-analyzer`
**Bad examples:**
- `helper` (too generic)
- `-agent-` (starts/ends with hyphen)
- `my_agent` (underscores not allowed)
- `ag` (too short, < 3 chars)
### description (required)
Defines when Claude should trigger this agent. **This is the most critical field** — it is loaded into context whenever the agent is registered, so the harness can decide when to dispatch.
**Must include:**
1. Triggering conditions ("Use this agent when...")
2. A short prose summary of the typical trigger scenarios
3. A pointer to a "When to invoke" section in the agent body for the detailed worked scenarios
**Format:**
```
Use this agent when [conditions]. Typical triggers include [scenario 1 in prose], [scenario 2 in prose], and [scenario 3 in prose]. See "When to invoke" in the agent body for worked scenarios.
```
**Best practices:**
- Name 2-4 trigger scenarios in the prose summary
- Cover both proactive (assistant invokes itself) and reactive (user requests) triggering
- Cover different phrasings of the same intent
- Be specific about when NOT to use the agent
- Put detailed scenarios in the body under "When to invoke" as a bullet list of prose descriptions
### model (required)
Which model the agent should use.
**Options:**
- `inherit` - Use same model as parent (recommended)
- `sonnet` - Claude Sonnet (balanced)
- `opus` - Claude Opus (most capable, expensive)
- `haiku` - Claude Haiku (fast, cheap)
**Recommendation:** Use `inherit` unless agent needs specific model capabilities.
### color (required)
Visual identifier for agent in UI.
**Options:** `blue`, `cyan`, `green`, `yellow`, `magenta`, `red`
**Guidelines:**
- Choose distinct colors for different agents in same plugin
- Use consistent colors for similar agent types
- Blue/cyan: Analysis, review
- Green: Success-oriented tasks
- Yellow: Caution, validation
- Red: Critical, security
- Magenta: Creative, generation
### tools (optional)
Restrict agent to specific tools.
**Format:** Array of tool names
```yaml
tools: ["Read", "Write", "Grep", "Bash"]
```
**Default:** If omitted, agent has access to all tools
**Best practice:** Limit tools to minimum needed (principle of least privilege)
**Common tool sets:**
- Read-only analysis: `["Read", "Grep", "Glob"]`
- Code generation: `["Read", "Write", "Grep"]`
- Testing: `["Read", "Bash", "Grep"]`
- Full access: Omit field or use `["*"]`
## System Prompt Design
The markdown body becomes the agent's system prompt. Write in second person, addressing the agent directly.
### Structure
**Standard template:**
```markdown
You are [role] specializing in [domain].
**Your Core Responsibilities:**
1. [Primary responsibility]
2. [Secondary responsibility]
3. [Additional responsibilities...]
**Analysis Process:**
1. [Step one]
2. [Step two]
3. [Step three]
[...]
**Quality Standards:**
- [Standard 1]
- [Standard 2]
**Output Format:**
Provide results in this format:
- [What to include]
- [How to structure]
**Edge Cases:**
Handle these situations:
- [Edge case 1]: [How to handle]
- [Edge case 2]: [How to handle]
```
### Best Practices
✅ **DO:**
- Write in second person ("You are...", "You will...")
- Be specific about responsibilities
- Provide step-by-step process
- Define output format
- Include quality standards
- Address edge cases
- Keep under 10,000 characters
❌ **DON'T:**
- Write in first person ("I am...", "I will...")
- Be vague or generic
- Omit process steps
- Leave output format undefined
- Skip quality guidance
- Ignore error cases
## Creating Agents
### Method 1: AI-Assisted Generation
Use this prompt pattern (extracted from Claude Code):
```
Create an agent configuration based on this request: "[YOUR DESCRIPTION]"
Requirements:
1. Extract core intent and responsibilities
2. Design expert persona for the domain
3. Create comprehensive system prompt with:
- Clear behavioral boundaries
- Specific methodologies
- Edge case handling
- Output format
- A "When to invoke" section listing 2-4 trigger scenarios as prose bullets
4. Create identifier (lowercase, hyphens, 3-50 chars)
5. Write description with triggering conditions and a short prose summary of trigger scenarios
Return JSON with:
{
"identifier": "agent-name",
"whenToUse": "Use this agent when... Typical triggers include [...]. See \"When to invoke\" in the agent body.",
"systemPrompt": "You are..."
}
```
Then convert to agent file format with frontmatter.
See `examples/agent-creation-prompt.md` for complete template.
### Method 2: Manual Creation
1. Choose agent identifier (3-50 chars, lowercase, hyphens)
2. Write description with examples
3. Select model (usually `inherit`)
4. Choose color for visual identification
5. Define tools (if restricting access)
6. Write system prompt with structure above
7. Save as `agents/agent-name.md`
## Validation Rules
### Identifier Validation
```
✅ Valid: code-reviewer, test-gen, api-analyzer-v2
❌ Invalid: ag (too short), -start (starts with hyphen), my_agent (underscore)
```
**Rules:**
- 3-50 characters
- Lowercase letters, numbers, hyphens only
- Must start and end with alphanumeric
- No underscores, spaces, or special characters
### Description Validation
**Length:** 10-5,000 characters
**Must include:** Triggering conditions and examples
**Best:** 200-1,000 characters with 2-4 examples
### System Prompt Validation
**Length:** 20-10,000 characters
**Best:** 500-3,000 characters
**Structure:** Clear responsibilities, process, output format
## Agent Organization
### Plugin Agents Directory
```
plugin-name/
└── agents/
├── analyzer.md
├── reviewer.md
└── generator.md
```
All `.md` files in `agents/` are auto-discovered.
### Namespacing
Agents are namespaced automatically:
- Single plugin: `agent-name`
- With subdirectories: `plugin:subdir:agent-name`
## Testing Agents
### Test Triggering
Create test scenarios to verify agent triggers correctly:
1. Write agent with specific triggering examples
2. Use similar phrasing to examples in test
3. Check Claude loads the agent
4. Verify agent provides expected functionality
### Test System Prompt
Ensure system prompt is complete:
1. Give agent typical task
2. Check it follows process steps
3. Verify output format is correct
4. Test edge cases mentioned in prompt
5. Confirm quality standards are met
## Quick Reference
### Minimal Agent
```markdown
---
name: simple-agent
description: Use this agent when [condition]. Typical triggers include [trigger 1] and [trigger 2]. See "When to invoke" in the agent body.
model: inherit
color: blue
---
You are an agent that [does X].
## When to invoke
- **[Scenario A].** [Description.]
- **[Scenario B].** [Description.]
Process:
1. [Step 1]
2. [Step 2]
Output: [What to provide]
```
### Frontmatter Fields Summary
| Field | Required | Format | Example |
|-------|----------|--------|---------|
| name | Yes | lowercase-hyphens | code-reviewer |
| description | Yes | Prose triggers | Use when... Typical triggers include... |
| model | Yes | inherit/sonnet/opus/haiku | inherit |
| color | Yes | Color name | blue |
| tools | No | Array of tool names | ["Read", "Grep"] |
### Best Practices
**DO:**
- ✅ Name 2-4 trigger scenarios in the description (as prose)
- ✅ Put detailed worked scenarios in a "When to invoke" body section, as prose bullets
- ✅ Write specific triggering conditions
- ✅ Use `inherit` for model unless specific need
- ✅ Choose appropriate tools (least privilege)
- ✅ Write clear, structured system prompts
- ✅ Test agent triggering thoroughly
**DON'T:**
- ❌ Use generic descriptions without trigger scenarios
- ❌ Omit triggering conditions
- ❌ Give all agents same color
- ❌ Grant unnecessary tool access
- ❌ Write vague system prompts
- ❌ Skip testing
## Additional Resources
### Reference Files
For detailed guidance, consult:
- **`references/system-prompt-design.md`** - Complete system prompt patterns
- **`references/triggering-examples.md`** - Example formats and best practices
- **`references/agent-creation-system-prompt.md`** - The exact prompt from Claude Code
### Example Files
Working examples in `examples/`:
- **`agent-creation-prompt.md`** - AI-assisted agent generation template
- **`complete-agent-examples.md`** - Full agent examples for different use cases
### Utility Scripts
Development tools in `scripts/`:
- **`validate-agent.sh`** - Validate agent file structure
- **`test-agent-trigger.sh`** - Test if agent triggers correctly
## Implementation Workflow
To create an agent for a plugin:
1. Define agent purpose and triggering conditions
2. Choose creation method (AI-assisted or manual)
3. Create `agents/agent-name.md` file
4. Write frontmatter with all required fields
5. Write system prompt following best practices
6. Name 2-4 trigger scenarios in description (prose) and detail them in a "When to invoke" body section
7. Validate with `scripts/validate-agent.sh`
8. Test triggering with real scenarios
9. Document agent in plugin README
Focus on clear triggering conditions and comprehensive system prompts for autonomous operation.
章节与文件索引
按说明文件中的顺序排列。
概述
姓名(必填)
描述(必填)
型号(必填)
颜色(必填)
文件/命令 -> code-reviewer · test-generator · api-docs-writer · security-analyzer · helper · -agent- · my_agent · inherit
内容校验值 -> d3e5c9b46325
当前原文的自动摘译,尚未人工审校。
概述
代理是独立处理复杂的多步骤任务的自治子流程。了解代理结构、触发条件和系统提示设计可以创建强大的自主能力。关键概念:代理用于自主工作,命令用于用户启动的操作带有 YAML frontmatter 的 Markdown 文件格式通过带有示例的描述字段触发
姓名(必填)
用于命名空间和调用的代理标识符。格式:仅小写字母、数字、连字符 长度:3-50 个字符 模式:必须以字母数字开头和结尾 好的示例:
描述(必填)
定义 Claude 何时触发此代理。这是最关键的字段——每当代理注册时,它都会加载到上下文中,因此线束可以决定何时调度。必须包括: 触发条件(“在...时使用此代理”) 典型触发场景的简短摘要 指向代理正文中“何时调用”部分的指针,了解详细的工作场景
型号(必填)
代理应该使用哪种模型。选项:
inherit- 使用与父级相同的模型(推荐)sonnet- Claude Sonnet(平衡)opus- Claude Opus(最有能力,最昂贵)颜色(必填)
UI 中代理的视觉标识符。选项:
blue、cyan、green、yellow、magenta、red指南:为同一插件中的不同代理选择不同的颜色 对相似的代理类型使用一致的颜色