代码审查
- 作者仓库星标 0
- 作者更新于 2026年8月24日 14:19
- 作者仓库 skills
- 领域
- 工程开发
- 作者声明的智能体
- 未找到明确声明;不据此推断已兼容或已测试
- 静态检查
- 88 / 100 · 启发式扫描,不代表运行安全
- 运行环境证据
- 未执行;当前没有隔离运行测试证据
- 作者 / 版本 / 许可证
- @mattpocock · 未声明许可证
- 上下文用量评级
- 低消耗
- 接入复杂程度
- 需简单配置
- 是否需要外部接口密钥
- 不需要
- 兼容的系统
- 未声明(默认跨平台)
- 运行环境要求
- 未检出明确要求
- 检测到的文件与系统行为
-
- 只读
- 允许写入 / 修改
- 命令执行
- 网络行为
- 仅限本地
- 安装命令数
- 无(仅作为资料)
需要注意: 未声明工具权限范围;实际权限由运行环境决定。
Two-axis review of the diff between `HEAD` and a fixed point the user supplies:
- **Standards**: does the code conform to this repo's documented coding standards?
- **Spec**: does the code faithfully implement the originating issue / spec?
Both axes run as **parallel sub-agents** so they don't pollute each other's context, then this skill aggregates their findings.
The issue tracker should have been provided to you. If `docs/agents/issue-tracker.md` is missing, tell the user to run `/setup-matt-pocock-skills`.
## Process
### 1. Pin the fixed point
Whatever the user said is the fixed point (a commit SHA, branch name, tag, `main`, `HEAD~5`, etc.). If they didn't specify one, ask for it.
Capture the diff command once: `git diff <fixed-point>...HEAD` (three-dot, so the comparison is against the merge-base). Also note the list of commits via `git log <fixed-point>..HEAD --oneline`.
Before going further, confirm the fixed point resolves (`git rev-parse <fixed-point>`) and the diff is non-empty. A bad ref or empty diff should fail here, not inside two parallel sub-agents.
### 2. Identify the spec source
Look for the originating spec, in this order:
1. Issue references in the commit messages (`#123`, `Closes #45`, GitLab `!67`, etc.), fetched via the workflow in `docs/agents/issue-tracker.md`.
2. A path the user passed as an argument.
3. A spec file under `docs/`, `specs/`, or `.scratch/` matching the branch name or feature.
4. If nothing is found, ask the user where the spec is. If they say there isn't one, the **Spec** sub-agent will skip and report "no spec available".
### 3. Identify the standards sources
Anything in the repo that documents how code should be written, such as `CODING_STANDARDS.md` or `CONTRIBUTING.md`.
On top of whatever the repo documents, the Standards axis always carries the **smell baseline** below: a fixed set of Fowler code smells (_Refactoring_, ch.3) that applies even when a repo documents nothing. Two rules bind it:
- **The repo overrides.** A documented repo standard always wins; where it endorses something the baseline would flag, suppress the smell.
- **Always a judgement call.** Each smell is a labelled heuristic ("possible Feature Envy"), never a hard violation. Like any standard here, skip anything tooling already enforces.
Each smell reads *what it is* → *how to fix*; match it against the diff:
- **Mysterious Name**: a function, variable, or type whose name doesn't reveal what it does or holds. → rename it; if no honest name comes, the design's murky.
- **Duplicated Code**: the same logic shape appears in more than one hunk or file in the change. → extract the shared shape, call it from both.
- **Feature Envy**: a method that reaches into another object's data more than its own. → move the method onto the data it envies.
- **Data Clumps**: the same few fields or params keep travelling together (a type wanting to be born). → bundle them into one type, pass that.
- **Primitive Obsession**: a primitive or string standing in for a domain concept that deserves its own type. → give the concept its own small type.
- **Repeated Switches**: the same `switch`/`if`-cascade on the same type recurs across the change. → replace with polymorphism, or one map both sites share.
- **Shotgun Surgery**: one logical change forces scattered edits across many files in the diff. → gather what changes together into one module.
- **Divergent Change**: one file or module is edited for several unrelated reasons. → split so each module changes for one reason.
- **Speculative Generality**: abstraction, parameters, or hooks added for needs the spec doesn't have. → delete it; inline back until a real need shows.
- **Message Chains**: long `a.b().c().d()` navigation the caller shouldn't depend on. → hide the walk behind one method on the first object.
- **Middle Man**: a class or function that mostly just delegates onward. → cut it, call the real target direct.
- **Refused Bequest**: a subclass or implementer that ignores or overrides most of what it inherits. → drop the inheritance, use composition.
### 4. Spawn both sub-agents in parallel
**Standards sub-agent prompt** should include:
- The full diff command and commit list.
- The list of standards-source files you found in step 3, **plus the smell baseline from step 3** pasted in full (the sub-agent has no other access to it).
- The brief: "Report, per file/hunk where relevant, (a) every place the diff violates a documented standard: cite the standard (file + the rule); and (b) any baseline smell you spot: name it and quote the hunk. Distinguish hard violations from judgement calls: documented-standard breaches can be hard, but baseline smells are always judgement calls, and a documented repo standard overrides the baseline. Skip anything tooling enforces. Under 400 words."
**Spec sub-agent prompt** should include:
- The diff command and commit list.
- The path or fetched contents of the spec.
- The brief: "Report: (a) requirements the spec asked for that are missing or partial; (b) behaviour in the diff that wasn't asked for (scope creep); (c) requirements that look implemented but where the implementation looks wrong. Quote the spec line for each finding. Under 400 words."
If the spec is missing, skip the Spec sub-agent and note this in the final report.
### 5. Aggregate
Present the two reports under `## Standards` and `## Spec` headings, verbatim or lightly cleaned. Do **not** merge or rerank findings, because the two axes are deliberately separate (see _Why two axes_).
End with a one-line summary: total findings per axis, and the worst issue _within each axis_ (if any). Don't pick a single winner across axes: that's the reranking the separation exists to prevent.
## Why two axes
A change can pass one axis and fail the other:
- Code that follows every standard but implements the wrong thing → **Standards pass, Spec fail.**
- Code that does exactly what the issue asked but breaks the project's conventions → **Spec pass, Standards fail.**
Reporting them separately stops one axis from masking the other.
章节与文件索引
按说明文件中的顺序排列。
1. 固定固定点
2. 确定规格来源
3. 确定标准来源
4. 并行生成两个子代理
5. 骨料
文件/命令 -> HEAD · docs/agents/issue-tracker.md · /setup-matt-pocock-skills · main · HEAD~5 · git diff <fixed-point>...HEAD · git log <fixed-point>..HEAD --oneline · git rev-parse <fixed-point>
内容校验值 -> 718e1f3275e9
当前原文的自动摘译,尚未人工审校。
1. 固定固定点
用户所说的都是固定点(提交 SHA、分支名称、标签、
main、HEAD~5等)。如果他们没有指定,请询问。捕获 diff 命令一次:git diff <fixed-point>...HEAD(三点,因此比较是针对合并基础的)。另请注意通过git log <fixed-point>..HEAD --oneline提交的列表。在继续之前,请确认定点解析 (git rev-parse <fixed-point>) 并且 diff 不为空。错误的引用或空的差异应该在此处失败,而不是在两个并行子代理内失败。2. 确定规格来源
按以下顺序查找原始规范:提交消息中的问题引用(
#123、Closes #45、GitLab!67等),通过docs/agents/issue-tracker.md中的工作流程获取。用户作为参数传递的路径。docs/、specs/或.scratch/下的规范文件与分支名称或功能匹配。如果没有找到任何内容,请询问用户规格在哪里。如果他们说没有,规范子代理将跳过并报告“没有可用的规范”。3. 确定标准来源
存储库中记录如何编写代码的任何内容,例如
CODING_STANDARDS.md或CONTRIBUTING.md。除了存储库文档之外,标准轴始终带有以下气味基线:一组固定的 Fowler 代码气味(Refactoring,ch.3),即使存储库没有记录任何内容也适用。有两条规则绑定它: 存储库覆盖。记录在案的回购标准总是获胜;当它认可基线会标记的东西时,会抑制气味。4. 并行生成两个子代理
标准子代理提示符应包括: 完整的 diff 命令和提交列表。 您在步骤 3 中找到的标准源文件列表,以及完整粘贴的步骤 3 中的气味基线(子代理无法对其进行其他访问)。
5. 骨料
在
## Standards和## Spec标题下逐字或稍加修改地呈现两份报告。不要合并或重新排列结果,因为这两个轴是故意分开的(请参阅_为什么是两个轴_)。以一行总结结束:每个轴的总发现结果,以及每个轴内最严重的问题(如果有)。不要跨轴选出一个获胜者:这是分离所要防止的重新排名。