安全最佳实践
- 作者仓库星标 0
- 作者仓库 skills-registry
- 领域
- 安全
- 作者声明的智能体
- 未找到明确声明;不据此推断已兼容或已测试
- 静态检查
- 88 / 100 · 启发式扫描,不代表运行安全
- 运行环境证据
- 未执行;当前没有隔离运行测试证据
- 作者 / 版本 / 许可证
- @tomevault-io · 未声明许可证
- 上下文用量评级
- 低消耗
- 接入复杂程度
- 需简单配置
- 是否需要外部接口密钥
- 不需要
- 兼容的系统
- 未声明(默认跨平台)
- 运行环境要求
- 未检出明确要求
- 检测到的文件与系统行为
-
- 只读
- 允许写入 / 修改
- 命令执行
- 网络行为
- 仅限本地
- 安装命令数
- 无(仅作为资料)
需要注意: 未声明工具权限范围;实际权限由运行环境决定。
# Security Best Practices
## Overview
This skill provides a description of how to identify the language and frameworks used by the current context, and then to load information from this skill's references directory about the security best practices for this language and or frameworks.
This information, if present, can be used to write new secure by default code, or to passively detect major issues within existing code, or (if requested by the user) provide a vulnerability report and suggest fixes.
## Workflow
The initial step for this skill is to identify ALL languages and ALL frameworks which you are being asked to use or already exist in the scope of the project you are working in. Focus on the primary core frameworks. Often you will want to identify both frontend and backend languages and frameworks.
Then check this skill's references directory to see if there are any relevant documentation for the language and or frameworks. Make sure you read ALL reference files which relate to the specific framework or language. The format of the filenames is `<language>-<framework>-<stack>-security.md`. You should also check if there is a `<language>-general-<stack>-security.md` which is agnostic to the framework you may be using.
If working on a web application which includes a frontend and a backend, make sure you have checked for reference documents for BOTH the frontend and backend!
If you are asked to make a web app which will include both a frontend and backend, but the frontend framework is not specified, also check out `javascript-general-web-frontend-security.md`. It is important that you understand how to secure both the frontend and backend.
If no relevant information is available in the skill's references directory, think a little bit about what you know about the language, the framework, and all well known security best practices for it. If you are unsure you can try to search online for documentation on security best practices.
From there it can operate in a few ways.
1. The primary mode is to just use the information to write secure by default code from this point forward. This is useful for starting a new project or when writing new code.
2. The secondary mode is to passively detect vulnerabilities while working in the project and writing code for the user. Critical or very important vulnerabilities or major issues going against security guidance can be flagged and the user can be told about them. This passive mode should focus on the largest impact vulnerabilities and secure defaults.
3. The user can ask for a security report or to improve the security of the codebase. In this case a full report should be produced describe anyways the project fails to follow security best practices guidance. The report should be prioritized and have clear sections of severity and urgency. Then offer to start working on fixes for these issues. See #fixes below.
## Workflow Decision Tree
- If the language/framework is unclear, inspect the repo to determine it and list your evidence.
- If matching guidance exists in `references/`, load only the relevant files and follow their instructions.
- If no matching guidance exists, consider if you know any well known security best practices for the chosen language and or frameworks, but if asked to generate a report, let the user know that concrete guidance is not available (you can still generate the report or detect for sure critical vulnerabilities)
# Overrides
While these references contain the security best practices for languages and frameworks, customers may have cases where they need to bypass or override these practices. Pay attention to specific rules and instructions in the project's documentation and prompt files which may require you to override certain best practices. When overriding a best practice, you MAY report it to the user, but do not fight with them. If a security best practice needs to be bypassed / ignored for some project specific reason, you can also suggest to add documentation about this to the project so it is clear why the best practice is not being followed and to follow that bypass in the future.
# Report Format
When producing a report, you should write the report as a markdown file in `security_best_practices_report.md` or some other location if provided by the user. You can ask the user where they would like the report to be written to.
The report should have a short executive summary at the top.
The report should be clearly delineated into multiple sections based on severity of the vulnerability. The report should focus on the most critical findings as these have the highest impact for the user. All findings should be noted with an numeric ID to make them easier to reference.
For critical findings include a one sentence impact statement.
Once the report is written, also report it to the user directly, although you may be less verbose. You can offer to explain any of the findings or the reasons behind the security best practices guidance if the user wants more info on any findings.
Important: When referencing code in the report, make sure to find and include line numbers for the code you are referencing.
After you write the report file, summarize the findings to the user.
Also tell the user where the final report was written to
# Fixes
If you produced a report, let the user read the report and ask to begin performing fixes.
If you passively found a critical finding, notify the user and ask if they would like you to fix this finding.
When producing fixes, focus on fixing a single finding at a time. The fixes should have concise clear comments explaining that the new code is based on the specific security best practice, and perhaps a very short reason why it would be dangerous to not do it in this way.
Always consider if the changes you want to make will impact the functionality of the user's code. Consider if the changes may cause regressions with how the project works currently. It is often the case that insecure code is relied on for other reasons (and this is why insecure code lives on for so long). Avoid breaking the user's project as this may make them not want to apply security fixes in the future. It is better to write a well thought out, well informed by the rest of the project, fix, then a quick slapdash change.
Always follow any normal change or commit flow the user has configured. If making git commits, provide clear commit messages explaining this is to align with security best practices. Try to avoid bunching a number of unrelated findings into a single commit.
Always follow any normal testing flows the user has configured (if any) to confirm that your changes are not introducing regressions. Consider the second order impacts the changes may have and inform the user before making them if there are any.
# General Security Advice
Below is a few bits of secure coding advice that applies to almost any language or framework.
### Avoid Using Incrementing IDs for Public IDs of Resources
When assigning an ID for some resource, which will then be used by exposed to the internet, avoid using small auto-incrementing IDs. Use longer, random UUID4 or random hex string instead. This will prevent users from learning the quantity of a resource and being able to guess resource IDs.
### A note on TLS
While TLS is important for production deployments, most development work will be with TLS disabled or provided by some out-of-scope TLS proxy. Due to this, be very careful about not reporting lack of TLS as a security issue. Also be very careful around use of "secure" cookies. They should only be set if the application will actually be over TLS. If they are set on non-TLS applications (such as when deployed for local dev or testing), it will break the application. You can provide a env or other flag to override setting secure as a way to keep it off until on a TLS production deployment. Additionally avoid recommending HSTS. It is dangerous to use without full understanding of the lasting impacts (can cause major outages and user lockout) and it is not generally recommended for most projects in review.
---
> Source: [barateza/mcp-plesk-unified](https://github.com/barateza/mcp-plesk-unified) — distributed by [TomeVault](https://tomevault.io).
<!-- tomevault:4.0:skill_md:2026-05-22 -->
章节与文件索引
按说明文件中的顺序排列。
概述
工作流程
工作流决策树
避免对资源的公共 ID 使用递增 ID
关于 TLS 的注释
文件/命令 -> <language>-<framework>-<stack>-security.md · <language>-general-<stack>-security.md · javascript-general-web-frontend-security.md · references/ · security_best_practices_report.md
内容校验值 -> 15048af2e819
当前原文的自动摘译,尚未人工审校。
概述
此技能描述了如何识别当前上下文使用的语言和框架,然后从该技能的参考目录加载有关该语言和/或框架的安全最佳实践的信息。此信息(如果存在)可用于编写新的默认安全代码,或被动检测现有代码中的主要问题,或(如果用户请求)提供漏洞报告并建议修复。
工作流程
这项技能的第一步是识别您被要求使用或已经存在于您正在从事的项目范围内的所有语言和所有框架。重点关注主要核心框架。
工作流决策树
如果语言/框架不清楚,请检查存储库以确定它并列出您的证据。如果
references/中存在匹配的指导,则仅加载相关文件并按照其说明进行操作。如果不存在匹配的指南,请考虑您是否了解所选语言和/或框架的任何众所周知的安全最佳实践,但如果要求生成报告,请让用户知道具体指南不可用(您仍然可以生成报告或检测某些关键漏洞)避免对资源的公共 ID 使用递增 ID
为某些资源分配 ID(然后将其暴露在互联网上)时,请避免使用小的自动递增 ID。请改用更长的随机 UUID4 或随机十六进制字符串。这将阻止用户了解资源的数量并猜测资源 ID。
关于 TLS 的注释
虽然 TLS 对于生产部署很重要,但大多数开发工作都将禁用 TLS 或由某些超出范围的 TLS 代理提供。 因此,请务必小心,不要将缺少 TLS 报告为安全问题。