测试助手
- 作者仓库星标 229,270
- 叉子 20,393
- 作者更新于 2026年6月16日 05:34
- 作者仓库 superpowers
- 领域
- 通用
- 兼容 Agent
-
- Claude Code
- Cursor
- Cline
- Codex
- Windsurf
- Gemini CLI
- +20
- 信任分
- 88 / 100 · 社区维护
- 作者 / 版本 / 许可
- @obra · 未声明 license
- Token 消耗评级
- 低消耗
- 接入复杂程度
- 需简单配置
- 是否需要外部 API Key
- 不需要
- 兼容的系统
- 未声明(默认跨平台)
- 底层运行要求
- 无特殊要求
- 文件与系统权限
-
- 只读
- 允许写入 / 修改
- Shell 执行
- 网络行为
- 仅限本地
- 安装命令数
- 26 条
档案由构建时根据 SKILL.md 与安装命令自动衍生,可能与作者实际意图存在差异。
需要注意: 未限定 allowed-tools,默认拥有全部工具权限。
---
name: verification-before-completion
description: Use when about to claim work is complete, fixed, or passing, before committing or creating PRs -…
category: 通用
runtime: 无特殊运行时
---
# verification-before-completion 输出预览
## PART A: 任务判断
- 适用问题:通用任务拆解、检查和交付。
- 输入要求:目标材料、限制条件、期望输出和验收方式。
- 证据边界:围绕“Overview / The Iron Law / The Gate Function”读取原文规则,不把推断写成作者承诺。
## PART B: 执行结果
- **01** 任务判断:确认你的需求是否属于通用任务拆解、检查和交付,并标出输入、限制和预期结果。
- **02** 执行计划:优先按“Overview / The Iron Law / The Gate Function”拆成步骤,说明每一步会读取什么、修改什么、产出什么。
- **03** 交付结果:给出可复制的命令、文件改动、检查清单或内容草稿,并说明如何继续迭代。
- **04** 风险边界:结合 读取文件、写入/修改文件、执行终端命令、主要在本地完成、通常不需要额外 API Key 给出执行前确认项。
## Running Rules
- 读取文件、写入/修改文件、执行终端命令;主要在本地完成;通常不需要额外 API Key。
- 先小样例验证,再放大到真实任务。
- 交付时同时给结果、检查口径和下一步迭代建议。 原文没有稳定的斜杠命令要求。安装验证后通常全局生效,直接在对话里点名这个 Skill 并描述任务即可。
告诉 Agent 目标文件或材料、期望结果、不可改范围、是否允许联网或执行命令。本 Skill 的权限画像是:读取文件、写入/修改文件、执行终端命令。
先用一个小任务确认它会围绕“Overview / The Iron Law / The Gate Function”工作;涉及文件或命令时,先看 diff、日志、预览或测试结果。
检查最终产物是否包含明确结果、必要证据和下一步动作;如果输出泛泛而谈,就补充输入、边界和验收标准后重跑。
---
name: verification-before-completion
description: Use when about to claim work is complete, fixed, or passing, before committing or creating PRs -…
category: 通用
source: obra/superpowers
---
# verification-before-completion
## 什么时候使用
- 让 Agent 不准空口说「我做完了」——必须先跑测试、看输出、对照需求才能宣告完成 适合处理通用任务拆解、检查、交付和复盘,核心价值是把输入、判断、执行、验证和交付边界固定下来,避免 Agent 泛泛回答。 把任务拆成可执行、可检查…
- 面向通用任务拆解、检查和交付,优先处理能明确输入、步骤和验收标准的工作。
## 需要提供什么
- 目标材料、目录范围、期望结果和不可改动内容。
- 是否允许联网、执行命令、读写文件或调用外部服务。
## 执行规则
- 围绕「Overview / The Iron Law / The Gate Function」组织步骤,不把推断写成作者事实。
- 读取文件、写入/修改文件、执行终端命令;主要在本地完成;通常不需要额外 API Key。
- 先跑小样例,确认结果可检查后再扩大任务范围。
## 输出要求
- 给出最终产物、关键证据、验证方式和下一步动作。
- 信息不足时标记 unknown,不编造命令、平台或依赖。 作者原文负责流程事实;仓库文件负责来源和命令;流狐只补充适用场景、限制和质量判断。
skill "verification-before-completion" {
输入层 -> 用户目标 + 目标文件 + 禁止范围 + 验收标准
上下文层 -> Overview / The Iron Law / The Gate Function
规则层 -> SKILL.md 触发条件 / 执行顺序 / 输出格式
运行层 -> 无特殊运行时 | 读取文件、写入/修改文件、执行终端命令 | 主要在本地完成
安全层 -> 通常不需要额外 API Key + 小任务验证 + diff / 日志复核
输出层 -> 可复制结果 + 检查清单 + 下一步迭代
} Verification Before Completion
Overview
Claiming work is complete without verification is dishonesty, not efficiency.
Core principle: Evidence before claims, always.
Violating the letter of this rule is violating the spirit of this rule.
The Iron Law
NO COMPLETION CLAIMS WITHOUT FRESH VERIFICATION EVIDENCE
If you haven't run the verification command in this message, you cannot claim it passes.
The Gate Function
BEFORE claiming any status or expressing satisfaction:
1. IDENTIFY: What command proves this claim?
2. RUN: Execute the FULL command (fresh, complete)
3. READ: Full output, check exit code, count failures
4. VERIFY: Does output confirm the claim?
- If NO: State actual status with evidence
- If YES: State claim WITH evidence
5. ONLY THEN: Make the claim
Skip any step = lying, not verifying
Common Failures
| Claim | Requires | Not Sufficient |
|---|---|---|
| Tests pass | Test command output: 0 failures | Previous run, "should pass" |
| Linter clean | Linter output: 0 errors | Partial check, extrapolation |
| Build succeeds | Build command: exit 0 | Linter passing, logs look good |
| Bug fixed | Test original symptom: passes | Code changed, assumed fixed |
| Regression test works | Red-green cycle verified | Test passes once |
| Agent completed | VCS diff shows changes | Agent reports "success" |
| Requirements met | Line-by-line checklist | Tests passing |
Red Flags - STOP
- Using "should", "probably", "seems to"
- Expressing satisfaction before verification ("Great!", "Perfect!", "Done!", etc.)
- About to commit/push/PR without verification
- Trusting agent success reports
- Relying on partial verification
- Thinking "just this once"
- Tired and wanting work over
- ANY wording implying success without having run verification
Rationalization Prevention
| Excuse | Reality |
|---|---|
| "Should work now" | RUN the verification |
| "I'm confident" | Confidence ≠ evidence |
| "Just this once" | No exceptions |
| "Linter passed" | Linter ≠ compiler |
| "Agent said success" | Verify independently |
| "I'm tired" | Exhaustion ≠ excuse |
| "Partial check is enough" | Partial proves nothing |
| "Different words so rule doesn't apply" | Spirit over letter |
Key Patterns
Tests:
✅ [Run test command] [See: 34/34 pass] "All tests pass"
❌ "Should pass now" / "Looks correct"
Regression tests (TDD Red-Green):
✅ Write → Run (pass) → Revert fix → Run (MUST FAIL) → Restore → Run (pass)
❌ "I've written a regression test" (without red-green verification)
Build:
✅ [Run build] [See: exit 0] "Build passes"
❌ "Linter passed" (linter doesn't check compilation)
Requirements:
✅ Re-read plan → Create checklist → Verify each → Report gaps or completion
❌ "Tests pass, phase complete"
Agent delegation:
✅ Agent reports success → Check VCS diff → Verify changes → Report actual state
❌ Trust agent report
Why This Matters
From 24 failure memories:
- your human partner said "I don't believe you" - trust broken
- Undefined functions shipped - would crash
- Missing requirements shipped - incomplete features
- Time wasted on false completion → redirect → rework
- Violates: "Honesty is a core value. If you lie, you'll be replaced."
When To Apply
ALWAYS before:
- ANY variation of success/completion claims
- ANY expression of satisfaction
- ANY positive statement about work state
- Committing, PR creation, task completion
- Moving to next task
- Delegating to agents
Rule applies to:
- Exact phrases
- Paraphrases and synonyms
- Implications of success
- ANY communication suggesting completion/correctness
The Bottom Line
No shortcuts for verification.
Run the command. Read the output. THEN claim the result.
This is non-negotiable.
先判断是否适合
作者设计意图
作者的方法与取舍
边界和复核