技能提高者
- 作者仓库星标 0
- 作者更新于 2026年8月24日 23:09
- 作者仓库 skills
- 领域
- 工程开发
- 作者声明的智能体
- 未找到明确声明;不据此推断已兼容或已测试
- 静态检查
- 88 / 100 · 启发式扫描,不代表运行安全
- 运行环境证据
- 未执行;当前没有隔离运行测试证据
- 作者 / 版本 / 许可证
- @trailofbits · 未声明许可证
- 上下文用量评级
- 中等消耗
- 接入复杂程度
- 需简单配置
- 是否需要外部接口密钥
- 不需要
- 兼容的系统
- 未声明(默认跨平台)
- 运行环境要求
- 未检出明确要求
- 检测到的文件与系统行为
-
- 只读
- 允许写入 / 修改
- 命令执行
- 网络行为
- 仅限本地
- 安装命令数
- 无(仅作为资料)
需要注意: 未声明工具权限范围;实际权限由运行环境决定。
# Skill Improver
Improve a Claude Code skill by running `/code-improver:improve` — a dynamic workflow
that loops a reviewer and a fixer subagent until a review reports zero critical/major
findings, then strips its own residue. This entry point wires the loop to the
`plugin-dev:skill-reviewer` agent, so the **plugin-dev plugin must be installed**
(marketplace `claude-plugins-official`). The loop, its ledger, and its guards live in
the workflow; this skill resolves the target and relays the outcome.
## Starting the loop
The user provided: `$ARGUMENTS` (if empty, take the target skill from the conversation).
### 1. Resolve the skill path
1. If the input ends with `/SKILL.md` and the file exists, use its directory
2. If the input is a directory containing `SKILL.md`, use that path
3. Otherwise `Glob(pattern="**/SKILL.md")` and filter by skill name or path substring:
- **Multiple matches:** ask the user to choose
- **No matches:** report the available skills
- **Single match:** proceed
### 2. Resolve the loop script
The loop is the dynamic workflow `workflows/improve.js` in this plugin. Launch it by
path: `scriptPath` takes a resolved absolute path, and the Workflow tool's `name` resolves
built-in and project workflows, so a marketplace-installed one may not answer to
`code-improver:improve`. Try in order, first hit wins — the home directories come before
`.` so an installed copy beats a checkout of this marketplace:
1. `Bash: ls -d -- "${CLAUDE_PLUGIN_ROOT}/workflows/improve.js"`
2. `Bash: ls -d -- "${CODEX_PLUGIN_ROOT}/workflows/improve.js"` (if that variable is set instead)
3. `Bash: find ~/.claude ~/.codex . -maxdepth 7 -path '*/code-improver/workflows/improve.js' -print -quit 2>/dev/null`
Use the path exactly as printed. Its plugin directory — the path with
`/workflows/improve.js` removed — is `pluginRoot`. If all three come back empty, try
`{name: "code-improver:improve"}` once; if that is unavailable too, stop and say the loop
could not be located. Do not assemble a path by hand and do not improvise the loop.
### 3. Invoke the workflow
Run it with the Workflow tool, `{scriptPath: "<the path from step 2>", args: {...}}`:
```json
{
"target": "<resolved absolute path>",
"reviewer": {
"kind": "agent",
"name": "plugin-dev:skill-reviewer",
"notes": "The target is a Claude Code skill directory; review it as a skill (frontmatter, triggering description, progressive disclosure, referenced files)."
},
"pluginRoot": "<the plugin directory from step 2>",
"maxRounds": 5
}
```
- `maxRounds` only if the user asked for a different cap (`--max-rounds N`).
- `pluginRoot` lets the run find its metrics collector; omit the key only if step 2 fell
through to the workflow name — the workflow then searches for itself.
- `scope` (repo-relative globs) only if the user restricted or widened what the loop may
touch; by default the workflow scopes to the skill's plugin directory.
- `decision` only on continuation (below).
The workflow runs in the background and needs no babysitting: it reviews, fixes,
re-reviews, checks scope after every fix round, and can only complete on a clean review.
It never commits; all changes stay in the working tree.
**If the Workflow tool is unavailable or denied, stop and say so.** Do not improvise the
loop inline with direct edits — the ledger, scope guard, and escalation guarantees live
in the workflow, and an inline imitation has none of them (observed failure: an inline
fallback "fixed" a finding by weakening the documented guarantee, exactly what the loop
exists to prevent).
**If the result is `halted: "reviewer-unavailable"`, relay it and stop.** The reviewer
this skill names is not installed; tell the user to install the `plugin-dev` plugin from
the `claude-plugins-official` marketplace and re-run. Do not review the skill yourself.
**Do not end your turn while the loop is running.** The Workflow tool returns a task id
immediately; the result comes later. In an interactive session the completion
notification re-invokes you — wait for it. In a non-interactive run (scripted, CI, eval)
there is no later turn: stopping abandons the loop mid-round, so after launching, poll
the task (TaskOutput with the returned task id, or sleep-and-recheck) until it completes,
then relay the result. A session that answers "the loop is running, I'll report later"
has lost the run.
## Relaying the result
The workflow returns a structured result. Report it honestly — the distinctions matter:
- **`converged: true`** — the last action was a review with zero critical/major findings.
Report rounds used, remaining minor findings (`open_minor_count`), and the artifact
paths (`ledger_path`, `metrics`).
- **`capped: true`** — the fix budget ran out and the FINAL review still found blocking
issues. Say plainly: **capped, NOT converged**, and list `open_blocking`. Do not
present this as success.
- **`escalation`** — the loop detected it was not converging (recurring findings,
non-decreasing counts, or a fix relocating a problem). Relay the escalation message and
finding ids to the user: this needs a design decision, not more rounds.
- **`halted`** — a guard fired (scope violation, unregistered new files, a dead or
unavailable reviewer, or a finalize pass whose own edits failed the check that follows
it). Relay the paths in `violations`/`new_untracked_files`, the sites in
`finalize_regressions`, and the notes.
- **`notes`** always travel with the result — surface them; they include loud warnings
such as "a git repository was initialized".
## Continuing after an escalation
The loop stops on escalation by design. When the user decides (e.g. "keep the blocklist
and document the limitation"), start a fresh run with the same `target` plus:
```json
{ "decision": "<the user's ruling, verbatim>" }
```
The new run reloads the on-disk ledger, so every finding, rejection, and verdict carries
over — rounds restart, re-derivation does not.
To stop a running loop, stop the workflow task (TaskStop); the ledger on disk is current
to the last round and a re-run resumes from it.
## What the loop enforces (so you do not have to)
- **Fix verification** — the next review verifies every fix; fixes to executable
behavior carry pins that fail against the pre-fix code.
- **Scope** — a mechanical git-diff check after every fix round, and after the finalize
pass, halts on any out-of-scope change; out-of-scope files git does not track are
guarded by content hash, since no diff would show them; completion also requires no
unregistered new files in scope.
- **Report everything** — reviewers report all findings with severity; filtering happens
once, at the ledger verdict, and rejections are not re-litigated without new evidence.
- **Finalize** — before completion the loop strips narration comments, collapses version
churn to exactly one bump (in `plugin.json` and the marketplace entry that repeats it),
and runs a docs-match-code pass. Those edits land after the last review, so a check
reads them: an over-eager narration strip or a false docs claim halts with
`finalize-regression` instead of passing as done.
## When NOT to use
- **One-time review**: dispatch the `plugin-dev:skill-reviewer` agent directly
- **Quick single fixes**: edit the file directly
- **Non-skill targets**: use the `code-improver` skill with a reviewer that fits the
target, or `pr-improver` for a branch
- **Exploratory drafting**: manual iteration gives more control while the shape is fluid
章节与文件索引
按说明文件中的顺序排列。
开始循环
1.解决技能路径
2.解决循环脚本
3. 调用工作流程
转发结果
文件/命令 -> /code-improver:improve · plugin-dev:skill-reviewer · claude-plugins-official · $ARGUMENTS · /SKILL.md · Glob(pattern="**/SKILL.md") · workflows/improve.js · scriptPath
内容校验值 -> 62daa290ea9d
当前原文的自动摘译,尚未人工审校。
开始循环
用户提供:
$ARGUMENTS(如果为空,则从对话中获取目标技能)。1.解决技能路径
如果输入以
/SKILL.md结尾且文件存在,则使用其目录 如果输入是包含SKILL.md的目录,则使用该路径 否则Glob(pattern="/SKILL.md")并按技能名称或路径子字符串过滤: 多个匹配:要求用户选择 无匹配:报告可用技能2.解决循环脚本
循环就是这个插件中的动态工作流程
workflows/improve.js。按路径启动它:scriptPath采用已解析的绝对路径,工作流工具的name解析内置和项目工作流,因此市场安装的工具可能无法响应code-improver:improve。按顺序尝试,第一个成功 - 主目录位于.之前,因此安装的副本胜过从该市场结账:3. 调用工作流程
仅当用户要求不同的上限 (
--max-rounds N) 时,才使用工作流程工具{scriptPath: "<the path from step 2>", args: {...}}:maxRounds运行它。pluginRoot让运行找到它的指标收集器;仅当步骤 2 涉及工作流名称时才忽略该键 — 然后工作流会搜索自身。scope(相对于存储库的全局变量)仅当用户限制或扩大循环可能的范围时转发结果
工作流返回结构化结果。诚实地报告 - 区别很重要:
converged: true- 最后一项行动是零关键/主要发现的审查。报告使用的轮次、剩余的次要发现 (open_minor_count) 以及工件路径 (ledger_path、metrics)。capped: true— 修复预算已用完,最终审查仍发现阻塞